Hot Melt Bio Wax Distance 400g

Only the highest quality additives are used in the r.s.p. HOT MELT CHAIN WAX: 

Such as tungsten sulphide (WS2). Tungsten sulphide has an 

incredibly low coefficient of friction of 0.03 – better than 

Molybdenum, PTFE or even wet ice on wet ice! Increases power

transmission and reduces wear. Very low friction – works over a

wide temperature range from -270 °C to +650 °C

Application:

The chain must be completely cleaned of oil and grease. We

recommend our chain cleaner r.s.p. Jacky Chain or r.s.p. Brake

Cleaner. Heat the Hot Melt Wax (melting point approx. 95°C).

When the wax is completely liquid, hang the chain on a wire hook

and dip it into the liquid wax bath. Move the chain in the bath; air

bubbles may rise. After about 10-15 minutes, remove the chain 

and let it drip over the bath. Then hang it up to dry for at least

12 hours. Proceed in the same way with the chain lock. After drying

completely, reinstall the chain.

RSP-062068001 - WAX Melting device

Capacity: 500 ml
Voltage: 220-250V
Frequency: 50/60 Hz